What is the need for attention in the operation room renovation?
1. Wall surface, wall surface can be inclined 3 degrees, not only can reduce dust, but also can make the angle of light reflection is conducive to the operation of medical staff. Wood reinforcement can be selected. 600 x 600mm pale green tiles can be used for aseptic wall. The skirting board should be concave into the wall 1cm and integrated into the ground, with a radius of 40mm fillet. Two bumper plates should be installed on both sides of the channel and on the corner wall. It is advisable to use light steel keel partition wall to facilitate the concealed installation of various pipelines and wall fixtures. The surface should be decorated with high hardness, good integrity, less slit and tight gap. It can be made of 1150 color steel plate, combined with air supply outlet, return air outlet, observation window, embedded viewing lamp, instrument cabinet, disinfection cabinet, switch interface, etc. to combine the wall surface into a whole, and to reduce concave and convex surface and gap as far as possible.
2.. The operation room temperature should be maintained at around 25 C. It is cold in winter. When installing fire protection and suction, chimneys should be installed and smoke free indoors. If you use a charcoal basin for suction, it should be fully burned outdoors before moving into the room to avoid coal dust and carbon monoxide overflowing the room.
3. wash the water with water. A stand is arranged in the preparation room, and a larger poke is arranged on the upper part. A tap can be installed on the bucket, and a wooden long handle is arranged on the switch handle of the tap so as to move the switch with the upper arm or head. If hand washing water is river water, and water, should first add a proper amount (depending on the size of water poke) bleaching powder or alum agitation injection, and then pour water into the preoperative hand washing water poke.
8. If the operating table does not have a simple operating table, it can be replaced by a long table or door plate. The more the injection is to be placed, the more concave and convex it should be suitable. A sheet or plastic sheet should be hung above the operating table to prevent dust from falling into the operating area.
4. On the ground, should be flat, choose wear-resistant, skid-resistant, corrosion-resistant, easy to clean, dust-prone and non-cracking decoration materials, 100-class operating room can choose anti-static, antibacterial, fire-resistant, wear-resistant rubber floor, light yellow PVC floor; 1000-class, 10000-class operating room can choose Beige terrazzo or artificial stone floor. Pay attention to the rubber floor or artificial stone floor, together with the upper part of the integrated Yin Jiao treatment.
(The highlight of this article comes from: Shandong Jingzhiyuan Purification Engineering Co., Ltd. For more details, please refer to the operating room decoration website: Thank you for coming to http://www.sdyhrs.com)