Operating room planning and decoration covers many projects, including laboratory decoration engineering, laboratory electrical engineering, laboratory ventilation engineering, laboratory water supply and drainage engineering and so on. Then what problems should be paid attention to in the establishment of conventional laboratory planning and decoration, and listen to the analysis of the operating room decoration company for you.
1. All laboratories in the renovation project should consider the installation of ventilation to ensure that the indoor air in the laboratory is in a safe range.
2. The floor in the decoration project is recommended to use floor tile/PVC film gum, which is anti-corrosion and durable.
3. Suspension roof advocates the use of moisture-proof, dust-proof ceiling information.
4. Shade engineering is adopted in hydropower projects. Water valves should be equipped at each inlet to avoid the trouble caused by the failure and leakage of terminal valves.
Fifth, the lamp aspect proposes the suction top type LED lamp tube with maintenance cover, convenient maintenance, clean and energy-saving.
6. Air conditioning can be properly used in rooms with more ventilation cabinets.
7. Laboratory exhaust is strong exhaust. We must give priority to installing air conditioning and other relevant piping, so as to reduce the noise and vibration of strong exhaust in the later stage of construction.
8. The main power distribution in the laboratory area must be reserved according to the sum of high-power instruments.
9. Electricity and water in all functional rooms in the laboratory area should give priority to the construction of reserved hydropower stations for laboratory furniture manufacturers.
10. The overall decoration plan must be designed and constructed on the basis of the functional planning plan finally confirmed by the experimenters, so as to reduce the conflict between the equipment and the overall decoration.
In the early stage of laboratory design, we should consider the ventilation design of laboratory. How to walk the exhaust duct, how to place the ventilator, what kind of ventilator should be selected, and so on. So what should we pay attention to in the design of laboratory ventilation? Operating room decoration company Jin explains the general rules of laboratory ventilation design for you.
1. Conditions and criteria for ventilation实验室建筑通风的目的，是为了避免大量热，蒸汽或有害物质向人员活动区分发，避免有害物质对环境及建筑的污染和毁坏。大量余热余湿及有害物质的控制，应以预防为主，需求各谐和配合管理才干完成。当采用通风处置余热余湿能够满足请求时，应优先运用通风措施，能够极大降低空气处置的能耗。
The purpose of ventilation in laboratory buildings is to avoid the distribution of large quantities of heat, steam or harmful substances to human activities, and to avoid the pollution and destruction of harmful substances to the environment and buildings. The control of excess heat, excess humidity and harmful substances should be based on prevention, which requires the coordination of various specialties and management ability. When using ventilation to dispose of residual heat and humidity can meet the requirements, priority should be given to the use of ventilation measures, which can greatly reduce the energy consumption of air disposal.
2. Requests for hazardous substance emissions某些建筑，如科研和教学实验室，实验室设备用房等在运用和贮存过程中会散大量的热，蒸汽，粉尘以至有毒气体等，又如餐饮建筑的厨房，在排风中会含有大量油烟，假如不采取管理措施，会直接危害操作工作人员的身体安康，还会污染建筑四周的自然环境，影响周边居民或办公人员的安康。因而，必需采取综合有效的预防，管理和控制措施。关于餐饮建筑的油烟扫除的规范及处置措施，应契合餐饮业的油烟排放的规则。
Some buildings, such as scientific research and teaching laboratories, laboratory equipment rooms and so on, will dissipate a large amount of heat, steam, dust and toxic gases in the process of operation and storage, as well as kitchens of catering buildings, which will contain a large amount of oil fume in the exhaust air. If management measures are not taken, it will directly endanger the health of operating staff, and also pollute the natural environment around the building. The sound of the health of the surrounding residents or office workers. Therefore, it is necessary to take comprehensive and effective prevention, management and control measures. The regulations and disposal measures of cooking fume removal in catering buildings should conform to the rules of cooking fume emission in catering industry.
3. Selection of Ventilation Mode
Considering the requirement of energy saving, natural ventilation mainly changes the building mode reasonably and moderately, and uses the action of hot pressure and breeze pressure to form an organized airflow to meet the indoor requirements and reduce the energy consumption of ventilation. The application of natural ventilation should be fully considered in laboratory design to meet indoor requirements and reduce energy consumption of ventilation. The application of natural ventilation should be fully considered in laboratory planning and design. In summer, natural ventilation should be adopted as far as possible; in winter, when outdoor air directly enters the room without forming fog and condensation water on the outside and inside of the maintenance structure, natural ventilation should also be considered. When natural ventilation is adopted, the limitation of local outdoor climate parameters should be considered.
公司为大家介绍的相关内容，本文来源：http://www.sdyhrs.comThe above is the related content introduced by the operating room decoration company. This article is from http://www.sdyhrs.com.