Basic requirements for the decoration of houses, facilities and layout of intravenous drug distribution center
(a) The overall design layout of the intravenous drug control center (room), the setting of the functional hall and the area should be adapted to the work, and it can ensure the clean area, assist the work of the Department and the family area, reasonable abortion and logistics between different areas, and the clean area at different levels should have corresponding facilities to prevent cross contamination.
(2) The intravenous dispensing center (room) shall be set in a quiet area with less personnel flow, so as to facilitate communication with medical personnel and delivery of finished products. The setting place shall be far away from all kinds of pollution sources. It is forbidden to put it in the basement or semi basement. The surrounding environment, road surface and vegetation will not pollute the process of intravenous drug dispensing. The air outlet of the clean area shall be set in the surrounding clean and pollution-free area within 30 meters from the ground.
（3） The clean area and auxiliary working area of the intravenous dispensing center (room) shall have appropriate space for corresponding facilities and equipment; the clean area includes the dressing room, dressing room and dispensing operation room; the auxiliary working area shall be equipped with the drug store, prescription printing, preparation, finished product inspection, packaging, general dressing and other functional rooms.
(4) The interior of the intravenous dispensing center (room) shall be provided with sufficient lighting, and the color of the wall shall be suitable for human vision; the roof, wall and ground shall be flat, flat, clean and antiskid, easy to clean, and free of falling objects; the ceiling, wall and ground in the room of the clean area shall be free of cracks, able to bear cleaning and disinfection, and the joints shall be curved and tight; The construction materials used shall meet the environmental protection requirements.
(5)清洁区域的静脉药物配制(室)应当配备监视设备,如温度、湿度和气压和通风和通风设施,静脉注射毒品配药室的温度保持在18℃~ 26℃,相对湿度在40% ~ 65%,一定量的新鲜空气。
(5) The intravenous drug dispensing center (room) in the clean area shall be equipped with monitoring equipment, such as temperature, humidity and air pressure, ventilation and ventilation facilities. The temperature of the intravenous drug dispensing room shall be kept at 18 ℃ ~ 26 ℃, relative humidity at 40% ~ 65%, and a certain amount of fresh air.
（6） The cleaning standard of the clean area of the intravenous drug dispensing center (room) conforms to the relevant national regulations, and can only be put into use after passing the test by the legal testing department.
The above is a detailed introduction of the basic requirements for the decoration of houses, facilities and layout of intravenous drug distribution center. For more information, please click http://www.sdyhrs.com