新闻资讯
  • news
  • 咨询热线:
  • 0531-87568508
  • 18653128690
  • 公司新闻
  • 您现在的位置:首页 > 新闻资讯 > 公司新闻 >
  • 层流手术室设计施工的重点居然是这些!
    浏览: 发布日期:2018-01-04
      层流手术室是医院最为先进,洁净度要求最高的一个场所,手术室内装备的换气设备必须有空气净化过滤装置。层流手术室公司常规设计的层流手术室应设有无菌操作间和缓冲间,其洁净度洁净度一般10000级,局部百级(一般是通过超净工作台控制)室内温度保持在20-24℃,湿度保持在45-65%。这些都是层流手术室公司在建造时应该要注意到的。
      The laminar flow operation room is the most advanced place in the hospital and the cleanliness is the highest. The ventilation equipment in the operating room must have air purifying filter. Laminar flow operation room designed by laminar operation room should have aseptic operation room and buffer room. Its cleanliness and cleanliness is generally 10000 level, local 100 level (usually controlled by super clean workbench), indoor temperature is kept at 20-24 C, humidity is maintained at 45-65%. These are all the laminar flow operation room companies should pay attention to when they are built.
      层流手术室公司在设计施工中要注意的几个要点:
      Several key points should be paid attention to in the design and construction of the laminar flow operation room.
      层流手术室公司设计室内的空气净化系统可分为水平层流,垂直层流和乱流,选择气流形式一是要参照惯例,二是要取决于房间的工作参数。
      Can be divided into horizontal laminar flow in laminar flow operation room design indoor air purification system, vertical laminar flow and turbulent flow, is a form of selection with reference to the Convention, two is the working parameter depends on the room.
      净化洁净度与换气。层流手术室公司设计工程房间的洁净度取决于单位时间的换气次数,因此慎密考虑房间的工作性质,以及生产工艺要求,再决定净化系统的技术参数。
      Purify cleanliness and air change. Depends on the cleanliness of the room design engineering company in laminar flow operation room in unit time ventilation frequency, so consider the nature of the work room close, as well as the production process requirements, and then determines the technical parameters of the cleaning system.
      净化结构设计。层流手术室公司为了保证气流几乎不受干扰,就必须进行结合时期来设计,必要的谨慎可以防止净化车间设计工程房间里任何地方的灰尘积累。
      Decontamination structure design. Laminar operation room company must design in conjunction period to ensure airflow almost undisturbed, and the necessary caution can prevent dust accumulation in the purification workshop design engineering room.
      净化设计方案。层流手术室公司要确定设计方案,必须先对房间的工作性质以及其中的气流条件进行认真的考虑,发尘量大的车间不宜采用地面送风形式,洁净度要求高的车间应尽可能远离其它车间。
      Purification design scheme. If a laminar operation room company wants to confirm the design plan, it must first consider the working nature of the room and the air flow condition. The workshop with large dust emission is not suitable for the ground air supply. The workshop with high cleanliness should be kept away from other workshops as far as possible.
      如何才能使洁净室真正的达到洁净无菌呢?在进入层流手术室前,若不设置缓冲区,人和货物的进入会将车间外的尘埃及细菌带入车间内,使产品造成污染,从而降低产品的质量与生产效率。设置缓冲区,进去层流手术室的人员要严格进行控制,穿戴专用洁净服、衣帽、鞋子。医疗器械要严格按照要求进行消毒。
      How to truly achieve clean room clean and sterile? In laminar flow operation room before, if not set the buffer, and the goods will enter the dust and bacteria outside the workshop into the workshop, make the product pollution, thereby reducing the product quality and production efficiency. Setting the buffer zone, the personnel entering the laminar flow operation room should be strictly controlled and wear special clean clothes, caps and shoes. Medical equipment should be sterilized in strict accordance with the requirements.
      本文由层流手术室装修友情奉献,更多有关的知识请点击:http://www.sdyhrs.com/我们将用最先进的技术,最真诚的态度,为您提供最为全面的服务。我们将会陆续向大家奉献,敬请期待。
      This article is decorated by laminar operation room, friendship and dedication, and more related knowledge, please click: http://www.sdyhrs.com/, we will provide you with the most advanced technology and the most sincere attitude to provide you with the most comprehensive service. We will continue to contribute to you and look forward to it.

    上一篇:开展静脉药物集中配置装修的意义你知道吗?
    下一篇:药学服务的新模式当然是静脉药物配置中心!