Orthopaedic hospital operating room decoration should adhere to the criterion that its comprehensive performance reaches the norm, pay attention to air purification and disposal, and enhance the maintenance of the operating area; building norms should be applied and economic as the criterion to prevent one-sided pursuit of decoration.
The project of general operating Department (room) with ventilation and air conditioning in operation room decoration of plastic hospital can refer to the establishment of licensed clean operating department. It is necessary to abide by the laws, regulations, hygienic norms and clean technical norms of the country concerning economic establishment and health cause. In addition to the implementation of the established norms, they shall conform to the relevant norms, standards and rules in force in the country.
All kinds of clean rooms should be classified according to their bacterial concentration and air cleanliness level under empty or static conditions. The purification levels of our common hospital operating rooms, laminar flow operating rooms and ordinary cleaning operating rooms are different.
Operating room decoration in plastic hospital is composed of clean operating room and auxiliary room. It can build a functional area with all clean operating room as the center and necessary auxiliary room as its own system. It can also be built with a local clean operating room as the center, including the necessary auxiliary rooms, and a single criminal energy area coexisting with the general operating Department (room). ?
Request for wall decoration in operation room of plastic hospital:
When decorating the operating room of the plastic hospital, we should pay attention to the top, the bottom and the wall. Every aspect should be carefully designed.
Operating rooms in plastic hospitals should adopt light steel keel partition walls to facilitate the concealed installation of various pipelines and wall fixtures. The surface layer should adopt decorative materials with high hardness, good integrity, few seams and tight cracks. It can use 1150 color steel plate to separate air supply outlet, return air outlet, inspection window, embedded viewing lamp, instrument cabinet, disinfection cabinet, switch interface, etc. The wall surface should be combined into a whole to minimize concave and convex surfaces and cracks. Wall can be inclined 3 degrees, not only can reduce dust, but also can make the angle of light reflection conducive to the operation of medical personnel. The wall of aseptic zone can be connected to the top with 600 *600 mm light green tile. Kicking board should be concave into the wall 1 cm, and become one with the air, the radius of shade corner is 40 mm rounded corner. Two anti-collision plates shall be installed on the walls at both sides and corners of the passage.
In the ceiling design of operation room in plastic hospital, it is necessary to arrange, install efficient filter air outlet, lighting fixtures, smoke extinguisher, etc. All kinds of pipelines should be hidden in the roof. Lightweight steel keel 600 x 600 mm milky white steel purification plate ceiling can be selected and disposed of by sealant press strip according to the seam. The ceiling top shadowless lamp is darkly mounted, which can be used for the second-level top. The two sides of the second-level top adopt electric track, which opens and closes automatically to minimize pollution. The ceiling can also be suspended with aluminium clasps.
The above wonderful contents are obtained from the small arrangement of the operation room decoration. The above contents are all from the network. If you have different opinions, welcome you to our official website: http://www.sdyhrs.com! Leave us a comment and we will give you a regular reply!