What is the requirement of operating room purification project? We should all be inferior to the operating room in fact, its area is not very large, but its work is very much, especially in the control and conversion of wind, and bacteria control, which is a difficulty and a key point. The small editor of laminar flow operating room decoration leads you to look at the main points of the cleaning project of the operating room. Ask.
Laminar flow operating room purification project uses air cleaning technology to control microbial contamination in different degrees, so as to meet the requirements of controlling air cleanliness in space environment for all kinds of operations, and provide appropriate temperature and humidity to create a clean and comfortable operating space environment. The stability of laminar flow super-clean device is an important acceptance criterion for laminar flow purifying operating room because the number of bacteria and the concentration of anesthetic gas should be strictly controlled in operating room.
Because there are slight differences between European and American operating room purification standards and Chinese environment, conventional standards and regional industry standards are generally difficult to maintain the long-term stability of operating room purification (generally only 3-10 years reconstruction, low-end projects need renovation in one year), so there is a clear grade division in engineering quality. Some well-known purification engineering companies, in addition to the current standard, basically have their own implementation of higher than the chemical standard of purification indicators.
Operating room purification project should follow the corridor wall, roof material generally used 50 mm thick sandwich color steel plate manufacturing, its characteristics are beautiful, rigid. Arc corner, doors, window frames, etc. are generally made of special alumina profiles. The floor can be made of epoxy self-flow floor or wear-resistant plastic floor. If there is anti-static requirement, the anti-static type can be chosen. The air supply and return pipeline is made of hot-dipped zinc sheet, which is pasted with flame-retardant PF foamed plastic sheet with good purification and insulation effect. Stainless steel frame is used for high efficiency air supply outlet, which is beautiful and clean. Baking varnish aluminium plate is used for punching mesh plate. It is not rusty and sticky, and should be cleaned.
The wonderful content of this article is compiled by the small edition of laminar flow operating room decoration. Our company insists on the win-win concept of honesty and cooperation to provide you with perfect service. Welcome to http://www.sdyhrs.com.