A device in the oxygen supply system of a medical center is the confluence drainage, which is of course as important as the oxygen supply system. In fact, every part of the system is very important, there is no difference between the size of the exhaust equipment, how it works, you can learn in detail, especially some related medical personnel, later understand the governance and maintenance aspects.
Oxygen bus is a kind of equipment in central oxygen supply system. There are four high-pressure valves in the convergence of the two main components of the manifold, which are used to control the fusion of two sets of pipes. There are many points. Each group of valves, hoses and fixtures connect cylinders, equipped with high-pressure intermediate meters, for testing flow pipes. The pressure of the high-pressure valve is higher than that of the two groups of decompressors respectively. In order to control the use of pressure and flow, the decompression valve has two or more low-pressure valves, which are used to control two low- Convergence when body switching, low-pressure pipelines with low flow are equipped with low-pressure valves, which are always used to control low-pressure gas pipelines.
The bus of oxygen supply system in medical center is a centralized aeration or air supply device. It connects several cylinder gases to the busbar through valves and pipes, so that the cylinder can be inflated at the same time. Or the special equipment can be lowered and stabilized by pipeline and then transported to the place where it is used, so that the pressure of gas source of gas appliances can be stabilized and adjusted, and the purpose of uninterrupted air supply can be achieved.
Above is the relevant content of laminar flow operating room decoration for you to introduce, this article source: http://www.sdyhrs.com