新闻资讯
  • news
  • 咨询热线:
  • 0531-87568508
  • 18653128690
  • 行业新闻
  • 您现在的位置:首页 > 新闻资讯 > 行业新闻 >
  • 为什么重症监护室装修板材要用防火板?
    来源:http://www.sdyhrs.com 浏览: 发布日期:2019-11-27
      一座质量好,耐用的重症监护室装修,一定要有好的配套构造。重症监护室装修的配套产品有很多,如净化板材,通风构造,照明构造,地坪构造等等。根底也是更直观的,就是重症监护室装修的构造,也是所选用的板材。
      A good quality, durable intensive care room decoration, must have a good supporting structure. There are many matching products for ICU decoration, such as purification plate, ventilation structure, lighting structure, floor structure and so on. The root is also the most intuitive, that is, the structure of ICU decoration, but also the selected plate.
      下面依据详细运用请求,我公司来对板材进行逐个引见。干净室装修普通以工业铝材(不锈钢方通、喷塑方通)做框架,采用风机滤网机组FFU送风,周围采用防静电垂帘,顶部铺盖密缝盲板,构成一个密缝区,内部净化级别可达100-10万级;特别适用于车间内部分对干净度请求高的区域,如流水线作业区的高准确度产品组装区。干净室装修对象(产品、人及动物)在被加工、处置、治疗、防护及实验等过程中,对其所处环境内玷污物(影响对象的加工、处置、治疗等质量、合格率或胜利率的物质)停止控制的技术。
    为什么重症监护室装修板材要用防火板?
      Next, according to the detailed application request, our company will introduce the plates one by one. Generally, industrial aluminum materials (stainless steel square pass and spray plastic square pass) are used as the framework of clean room decoration, FFU of fan filter unit is used for air supply, anti-static vertical curtain is used around, and blind plate is covered on the top to form a close joint area, with internal purification level up to 1-100000. It is especially suitable for some areas in the workshop that require high cleanliness, such as high accuracy product assembly area in assembly line operation area 。 In the process of processing, disposal, treatment, protection and experiment, clean room decoration objects (products, people and animals) stop controlling the pollution (substances affecting the processing, disposal and treatment quality, qualification rate or winning rate of objects) in their environment.
      1.什么样的重症监护室装修板材是防火板。
      1. What kind of ICU decoration board is fire board.
      重症监护室装修板材的防火性能,取决于板材的夹芯,也就是板材中间所选取的资料。通常由聚苯乙烯,聚氨基甲酸酯,纸蜂窝,铝(Al)蜂窝,硅(silicon)岩,硫氧(Oxygen)镁(化学式Mg),玻镁(化学式Mg),岩棉(stone wool)等组成或组合组成。其中防火等级为B级的板材为非防火板,主要有聚苯乙烯,聚氨酯,纸蜂窝3种。目前在中国大局部区域,这三种板材都不得用来建造重症监护室装修,或充任净化车间的主要构造。纸蜂窝由于其质量较轻,挺度相对较好,大多用来做门板,不用于承重构造。
      The fire performance of the decoration board in ICU depends on the sandwich of the board, that is, the data selected in the middle of the board. It is usually composed of polystyrene, polyurethane, paper honeycomb, aluminum honeycomb, silicon rock, oxygen magnesium (chemical formula mg), glass magnesium (chemical formula mg), stone wool, etc. Among them, the board with fire rating of B is non fire board, mainly including polystyrene, polyurethane and paper honeycomb. At present, in most areas of China, none of these three kinds of plates can be used to construct the intensive care room decoration or serve as the main structure of the purification workshop. Because of its light weight and relatively good stiffness, paper honeycomb is mostly used for door panel, not for load-bearing structure.
      2.机制防火板材和手工防火板终究有什么区别?
      2. What is the difference between the mechanical fire-proof board and the manual fire-proof board?
      净化板从加工工艺上辨别,又分为机制板材和手工板材。干净室设计采用高压静电吸附除尘工作原理。静电式是采用高压静电吸附除尘的工作原理。静电场中的阴极线在高压静电的作用下,电晕层中产生大量的负离子,负离子在静电场的作用下,不时地向阳极运动。当空气中粉尘经过电场时,粉尘遭到负离子的碰撞带上电荷,带上电荷后的粉尘同样遭到静电场的作用,向阳极(集尘极)运动,抵达阳极后释放电荷。简单的说,机制板材是采用机器,一次成型。而手工板有四条钢带,全部采用手工制造。在其他参数(parameter)相同的前提下,手工版与机制板相比,拼缝小,板材挺度高,外观更美观。特别在装置门、窗区域,以及系统拼接处,整体浑然分歧,美观大方。而机制板只要两条钢带,每张板材宽度都是1200mm,在拼接,有时分需求切割,美观度不如手工板。
      The purification plate is distinguished from the processing technology, and is divided into mechanism plate and manual plate. The clean room design adopts the working principle of high-voltage electrostatic adsorption and dust removal. Electrostatic type is the working principle of high-voltage electrostatic adsorption dedusting. Under the action of high voltage static electricity, a large number of negative ions are produced in the corona layer, which move to the anode from time to time. When the dust in the air passes through the electric field, the dust is impacted by negative ions and charged. The charged dust is also affected by the electrostatic field, moving to the anode (dust collector) and releasing the charge when it reaches the anode. In short, the machine-made plate is machine-made, one-time forming. And the hand-made board has four steel strips, all of which are made by hand. Under the premise of the same other parameters, compared with the machine-made plate, the manual plate has smaller seam, higher plate stiffness and more beautiful appearance. Especially in the door and window area of the device, as well as the splicing of the system, the whole is totally different, beautiful and generous. As long as there are only two steel strips for the machine-made plate, the width of each plate is 1200mm. In the middle of splicing, sometimes it is cut according to the demand, and the beauty is not as good as the manual plate.
      3.净化板材为什么要掩盖(Cover)一层膜?
      3. Why should the purification plate cover a layer of film?
      重症监护室装修板材都是大批量消费(Produce),整车运输。在运输、装卸过程中,难免会呈现磕碰(kē pèng),摩擦现象,会对板材的漆面形成损伤。除了基板是不锈钢(不锈耐酸钢)板材,划伤的板材,假如长时间接触空气,会积灰,乃至生锈。掩盖(Cover)一层贴膜,就对板材停止了维护,大大降低(reduce)了损伤,是对重症监护室装修的维护。
      Intensive care room decoration board is a mass consumption (produce), vehicle transportation. In the process of transportation, loading and unloading, it is inevitable that there will be collision (K ē P è ng), friction phenomenon, which will damage the paint surface of the plate. In addition to the base plate is stainless steel (stainless and acid resistant steel) plate, scratched plate, if long-term contact with air, will accumulate dust, and even rust. Cover a layer of film, on the board to stop maintenance, greatly reduce the damage, is the maintenance of intensive care room decoration.
      以上是对为什么重症监护室装修板材要用防火板做的相关介绍,想要了解更多内容,欢迎访问网站:http://www.sdyhrs.com
      The above is an introduction to why the fire-proof board is used in the decoration of ICU. For more information, please visit http://www.sdyhrs.com

    上一篇:手术室净化装修公司分享关于无菌操作的原则
    下一篇:为什么手术无影灯是手术室装修不可缺少?