Cleaning method of filter in operating room cleaning method of equipment in operating room you need to know the long-term maintenance method of filter in operating room, right?
Operating room purification filter (function: filtering impurities, etc.):
1. The core part of the operating room purification filter (function: filtering impurities, etc.) is the core part of the filter. The filter element consists of a filter frame and a metal filter screen.
2. 当过滤器(功能:过滤杂质等)运行一段时间后，会有一定量的杂质沉淀在芯部。手术室的装修保证了手术台上的清洁达到标准。手术室一般是“正压”环境，空气压力根据不同区域(如手术室、无菌准备室、刷房、麻醉室及周围洁净区)的清洁要求而变化。由于手术室应严格控制细菌数量少、麻醉气体浓度低，层流超净装置的稳定性是层流净化手术室的重要验收指标。由于欧洲和美国之间的细微差别手术室清洁标准和中国环境,传统的标准和国内地区行业标准通常很难保证手术室清洁的长期稳定(一般来说,它只能在3 - 10年重建,低级的项目需要改造1年),这是一个明显的等级划分的工程质量。此时压降增大，流量减小，为了正确使用过滤器，必须及时清除滤芯中的杂质。
2. When the filter (function: filter impurities, etc.) operates for a period of time, a certain amount of impurities will settle in the core. The decoration of the operating room ensures that the cleanliness of the operating table meets the standard. The operating room is generally a "positive pressure" environment, and the air pressure changes according to the cleaning requirements of different areas (such as operating room, sterile preparation room, brush room, anesthesia room and surrounding clean area). Because the operating room should strictly control the number of bacteria and the concentration of anesthetic gas, the stability of laminar flow super clean device is an important acceptance index of laminar flow clean operating room. Due to the subtle differences between European and American operating room cleaning standards and Chinese environment, traditional international standards and domestic regional industry standards are usually difficult to ensure the long-term stability of operating room cleaning (generally speaking, it can only be rebuilt in 3-10 years, and low-level projects need to be rebuilt for 1 year), which is an obvious engineering quality of grade division. At this time, the pressure drop increases and the flow decreases. In order to use the filter correctly, impurities in the filter element must be removed in time.
3. Wash impurities. If the stainless steel (stainless steel acid resistant steel) screen filter especially points out that it cannot get deformation or other damage, the design needs to be pure. The compressor of the pump is meters and other equipment. After filtering and filtering medium (decisive material), it is easy for me to destroy it
4. Replace the deformed or damaged steel mesh.
Operating room purification precision filter (function: filter impurities, etc.):
1. The core of precision filter is filter element, which is composed of special materials and appropriate components.
2. When the precision filter (function: filtering impurities, etc.) runs for a certain time, the filter element will stop a certain amount of impurities at this time, so as to increase the pressure, reduce the flow and reduce the removal of impurities in the filtering time. The operating room should be strictly divided into restricted area (sterile operating room), semi restricted area (polluted operating room) and non restricted area. The partition design is divided into two parts: one is to distinguish the restricted area and half restricted area between two parts of different floors. Secondly, restricted area and non restricted area are set up in different areas of the same floor, and the transition from semi restricted area to equipment sharing is convenient in design and management. Pay special attention to the precision of the filter element, please do not deform or damage it, otherwise the filter element does not meet the design requirements after filtration.
4. It is used in the operating room, such as bag filter (function: filter impurities, etc.), polypropylene filter, etc., and there are also things that cannot be reused.
5. If the filter element is found to be deformed or damaged, it must be replaced immediately.