洁净车间装修工程要求
半导体洁净车间装修工程的质量是很关键的，有着很多的要求，下面简单为大家介绍下洁净车间装修的两个较为重要的要求。
The quality of semiconductor clean workshop decoration engineering is crucial and has many requirements. Below, we will briefly introduce two important requirements for clean workshop decoration.
一、对地面装修的规范要求。
1、 Standard requirements for ground decoration.
根据半导体在有关方面的装修规范所规定，在洁净车间地面装修上，应秉承其总体性能上的良好，铺平铺褴，无裂缝，硬耐磨且耐撞击以及防止其潮湿，不容易聚集静电，在清洗上，要易于清洁除尘等。
According to the decoration specifications of semiconductors in relevant aspects, in the decoration of clean workshop floors, the overall performance should be good, with flat and ragged paving, no cracks, hard and wear-resistant, and impact resistant, as well as preventing moisture, not easy to accumulate static electricity, and easy to clean and dust removal during cleaning.
二、环保材料的施工要求与应用。
2、 Construction requirements and applications of environmentally friendly materials.
依据洁净车间在有关方面的规定，其内部需要在平整度光滑度上做到高标准，无裂缝，无颗粒脱落，在此基础上，还需满足对清洗度以及耐消毒上的要求；在本半导体车间的顶唉和隔板上要求采用非燃烧体，且不能使用有害物质的邮寄符合材料；顶唉的耐火是有极限的，不低于0.4h，隔板也是有耐火限度的，不低于0.5h，对于疏散的顶唉和隔板的耐火度控制在不低于1.0h；在材料商的规范要求，现主要采用的是彩钢夹心板，其主要是作为一种新型的建筑板材，特点是保温、隔热、隔音、轻便、防水、抗震等；主要构造是由山下两层彩色涂层钢板作为面层，辅助材料是纸蜂窝，铝蜂窝，石膏岩棉等，在通过自动的符合成型机，在钢板上涂上胶水，钢板两侧加入薄壁的槽钢，再经过施工工艺上的加工而成；其用处也是颇为广泛。
According to the relevant regulations of the clean workshop, its interior needs to achieve high standards of flatness and smoothness, without cracks or particle shedding. On this basis, it also needs to meet the requirements for cleanliness and disinfection resistance; Non combustible materials are required to be used on the top and partition of this semiconductor workshop, and hazardous materials must not be used for mailing; The fire resistance of the top and partition has a limit of no less than 0.4 hours, and the fire resistance of the partition also has a limit of no less than 0.5 hours. For evacuation of the top and partition, the fire resistance is controlled at no less than 1.0 hours; According to the specifications of material suppliers, color steel sandwich panels are mainly used as a new type of building panel, characterized by insulation, sound insulation, lightweight, waterproof, seismic resistance, etc; The main structure is composed of two layers of colored coated steel plates as the surface layer, with auxiliary materials such as paper honeycomb, aluminum honeycomb, gypsum rock wool, etc., which are coated with glue on the steel plate through an automatic forming machine. Thin walled channel steel is added to both sides of the steel plate, and then processed through construction technology; Its use is also quite extensive.
This article is dedicated to the renovation of laminar flow operating rooms. For more information, please click http://www.sdyhrs.com Sincere attitude. We will provide you with comprehensive services. We will gradually contribute more relevant knowledge to everyone. Stay tuned
