新闻资讯
  • news
  • 咨询热线:
  • 0531-87568508
  • 18653128690
  • 行业新闻
  • 您现在的位置:首页 > 新闻资讯 > 行业新闻 >
  • 医院手术室多功用操控面板的设计施工
    来源:http://www.sdyhrs.com 浏览: 发布日期:2017-06-14
    ①检查是否由弹簧机外部因素构成的影响。所谓外部因素,即由弹簧机非自身因素构成的影响,通常体现为弹簧钢丝的质量优劣方面。由于目前弹簧材料的生产厂家比较多,弹簧钢丝在质量上参差不齐,
    Check whether the influence of external factors of spring machine. The so-called external factors, which influence the spring non self factors, usually reflects the quality of spring steel wire quality aspects. Due to the current spring material manufacturers, spring steel wire in the uneven quality,
    ②检查是否由弹簧机本身因素构成的影响。利用数控弹簧机卷绕弹簧过程中日常保养和机器检修是必要的,容易发现和检测问题就是机身零配件是否有松动。比如说,日常操作弹簧机时很多技术师傅忘记锁紧螺丝,这样就很容易导致螺丝产生松动,从而引起弹簧本身卷绕不稳定的现象。
    Check whether it is affected by the spring machine itself. The use of CNC spring winding spring in the process of daily maintenance and machine maintenance is necessary, the easiest to find and detect the problem is whether the body parts loose. For example, the daily operation of the spring when a lot of technical master forgot to lock the screw, so that it is easy to lead to loosening of the screw, which causes the spring winding instability.
    此外,弹簧机本身滑块是否有间隙,弹簧的稳定性与机器上的滑块有直接的关系。如果机身滑块因磨损产生间隙,那么就会导致弹簧机在卷绕弹簧的过程中外径不稳定及折角不到位的现象。因此,对弹簧机进行必要的日常保养和机器检修工作,可以有效减少弹簧机产生的故障率,提升卷绕弹簧的稳定性和精确度等要求。
    In addition, there is a gap between the spring of the spring itself, the stability of the spring and the slider on the machine has a direct relationship. If the fuselage slide due to wear gap, then it will lead to the spring in the process of winding spring and the instability of the Chinese and foreign corners and corners are not in place. Therefore, it is necessary to carry out the daily maintenance and machine maintenance work, which can effectively reduce the failure rate of spring machine, improve the stability and precision of winding spring.
    ③操作弹簧机过程中人为因素构成的影响。操作人员在调试电脑弹簧机时调线工作是重要的部分,如果送线不稳定则会直接影响弹簧的卷绕不稳定。此外,影响送线不稳定的因素除了调线部分外,还与刀具的精度和送线轴等的同心度有关。一般来说,0.5mm以下线径的弹簧对弹簧机配套刀具的要求非常高。
    The influence of human factors in the operation of spring machine. The operator in the debugging of computer spring machine at work is the most important part, if the wire instability will directly affect the spring coiling instability. In addition, the factors affecting the instability of the transmission line in addition to the part of the line, but also with the precision of the cutter and the concentricity of the spool and so on. In general, the following line diameter 0.5mm spring on the spring machine supporting tool requirements are very high.
    总之,日常操作中一旦弹簧机出现卷簧不稳定的情况,我们要及时地查找出问题的根源并给予解决。因引,我们要做好弹簧机的日常保养和检修工作,尽量减少弹簧机卷绕弹簧不稳定因素的产生。
    In short, the daily operation of the spring coil spring instability occurs, we must promptly find out the root causes of the problem and to solve. As a result, we have to do a good job in the daily maintenance and maintenance of the spring machine, to minimize the spring coil spring unstable factors.
    山东净之源净化工程有限公司的手术室装修提供技术支持,更多精彩内容请进入: http://www.sdyhrs.com,我们会倾情为您解答。
    Shandong clean purification Engineering Co., Ltd. to provide technical support for the operation room, more exciting content please enter: http://www.sdyhrs.com, we will love you.

    上一篇:洁净手术室空气细菌浓度的检测需要哪些条件?
    下一篇:ICU装修时的基本布局及特点